









![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()





| I. Product Technical Parameters | |||||||||
| Voltage AC | Power | Lumen | Frequency | Color temperature | Color rendering index | Power factor | Product life name | Working temperature | Lamp holder |
| 85-265V | 5-7W | 300-350LM | 50-60Hz | 6000K | >70% | >0.80 | 25000H | - 45 ° ~ + 55 ° | E26/E27/B22 |
Ii. Product Introduction
The product shell is made of ABS injection molding. The reasonable optical design and the use of lampshade material with a light transmittance of over 90% have enhanced the illuminance and brightness of the product.
2. It adopts low light attenuation, low power consumption, high efficiency, small power light source, energy-saving, remarkable and long service life.
3. It has excellent heat dissipation performance, with zero flicker, no ultraviolet light, no glare and low radiation. High color rendering index and good color rendering property.
4. The installation method of the product is consistent with that of traditional lamps and can be directly matched with E27/E26/B22 screws.
Iii. Usage Method
1. The product is set to lighting mode by default. The light turns on when the mains power is on and off when the power is off. You can also use a remote control to turn it on and off.
2.EL is a function key, such as for switching the emergency DC/AC lighting mode. The DC mode is for built-in lithium battery operation. AC works for the municipal power supply.
If the DC mode is switched, the light will not light up when the mains power comes, but will automatically light up when the mains power is cut off. After power failure, the bulb can remain lit for 3 to 4 hours. When switching to the AC mode, the phase is reversed.
4. When the battery potential drops below a specific value, the power manager automatically recognizes and charges the battery. When fully charged, the system will automatically disconnect, and at the same time, overcharge and overdischarge of the battery will be carried out to extend its lifespan. The charging time of this product is 8 to 10 hours, which is the battery life. It can also be done according to the customer's requirements.
Iv. Application
It can be used as a common light bulb (spotlights, table lamps, floor lamps, chandeliers, downlights) in daily life, for home lighting, commercial lighting, garages, warehouses, restaurants, exhibition halls, markets, shopping centers, and malls, replacing traditional incandescent bulbs and lamps, saving electricity and money.
2. In case of sudden power outage, it can be used as an emergency light flashlight to continue providing illumination, allowing you to easily continue your activities and business.
3. In case of catastrophic power outages (earthquakes, floods), emergency lighting guides rescue and escape, conveys light, conveys hope, and prolongs life.
4. Desk lamp and reading lamp on the bed, no worries even when there are regular power outages in the school dormitory, good assistants for reviewing and reading.
V. Precautions
Please read the product specification sheet to confirm whether the usage environment meets the conditions stated in the specification sheet before using it.
2. When using LED rechargeable bulbs, do not use them randomly based on the voltage and battery selection.
When connecting the product to the power supply, please make sure the switch is in the off position first. After the lamp is turned on, do not touch the surface of the lamp with your hands.
4. This product is for indoor use only. Please be careful not to let it come into contact with water when used outdoors.
Vi. Warranty Service: Thank you for using our company's products. Our company will provide you with the following services:
The free warranty period is one year.
2. The following situations are no longer covered by the warranty
3. Damage caused by unexpected factors or improper adaptation.
4. Damages caused by self-repair without the permission of our company.
5. After the warranty period, it can still be used after repair.
6. Do not attempt to repair it yourself. It should be done by professionals or a maintenance center; otherwise, it may cause danger. The consequences are at your own risk!!


















