Product Name: Electric Shaver, Simple Single Size: 9.5*7*18.8cm(including box)

Model: LK-8806 Simple Package Weight: 190 grams (including box)

Power: 4W Simple box: 80 pieces

Voltage: 220V. Simply packed whole box. Dimensions: 56.5*38.5*52CM

Net weight of the whole box: 20.4kg gross weight of the simple packed whole box: 21.5kg

Weight of the set product: 300g

Product size of the set: 16*8*19

The outer box size of the set product is 66*42*61.5

Set packing quantity: 60 pieces

Real shots of the set version

Real shooting of the single-player version

This double-ring blade electric shaver enables you to clean faster, more easily and more effectively. The blade head can be adjusted to fit the uneven contour of the face closely, giving you a more comfortable and close-fitting shave.
2. The blade automatically grinds the knife mesh. When a razor is in operation, the blade constantly grinds against the hard alloy mesh cover, which can keep the blade sharp all the time.
3. For the first use of this model, please charge it for 8 hours before use. If you haven't used it for half a month, be sure to charge it for 8 hours before use. Make sure the rechargeable battery is not discharged and the battery capacity is maintained. Only in this way can the lifespan of the razor be prolonged.
The battery (1.2V) of this razor can be recharged 500 times without any change in capacity.
5. This razor is equipped with a high-speed silver-palladium motor, featuring a long service life, low noise, strong power and light vibration.

Tips for using a razor

The blade head needs to be thoroughly cleaned every four weeks. After removing the mesh frame, spray a special cleaner 5 centimeters away from the mesh frame. After a while, you can use a small brush to remove the stubble and dirt inside the blade head.

2. Clean the knife head with a small brush. Do not clean the retina with a small brush to avoid damage.

3. After each shave, remove the retina frame, tap it gently on a flat surface a few times, and then reinstall it.

4. After each use, cover the retina blade head with a protective cover to prevent retina damage.

5. To ensure the high-quality performance of the electric whisker, it is particularly recommended that you replace the entire set of the cutter head and mesh every two years.

6. To maintain the service life of the battery inside the machine, the razor should be completely drained of power during normal use every six months or so, and then recharged.

7. As the back of the face will slightly expand after washing, it is best to shave before washing your face. The ideal time to shave is after getting up in the morning and before washing your face.

When using a web razor, please keep the razor perpendicular to your face and hold it at a 90-degree right Angle.

9. Since beards grow downward, scraping in the opposite direction will make the stubble stand up and be easier to clean. Therefore, when shaving, it should be done from bottom to top in the opposite direction.

10. When shaving, hold the skin tightly with your hand. Do not push the blade hard. Just slide it gently over the beard area and the stubble will be removed completely.

【 Charging Method

It is essential to charge with an alternating current of 220V/50Hz
2. Turn off the switch, push out the charging pin and plug it into the power socket.
3. Charging is not allowed when the switch is not turned off.
4. When charging, the charging indicator light is on.
The standard charging time is 2 hours.
【 Notes 】

Do not charge in areas where the rated voltage exceeds 240V; otherwise, a malfunction may occur.
Do not charge continuously for more than 24 hours, nor charge when the temperature is below 0℃ or above 40℃, otherwise the battery life will be shortened.
Do not rinse the body with water, nor take it into the bathroom for use, otherwise it may malfunction.
When there is dirt on the body part, you can use a soft cloth dipped in neutral detergent to wipe it. Do not wipe with alcohol or gasoline.
When abnormal conditions occur during charging or use of the product (such as abnormal smell, temperature or sound), the power supply should be cut off immediately and the use should be stopped.

Proper use and maintenance of electric shavers not only achieve satisfactory shaving results but also extend their service life. The following aspects should be noted when in use.
When connecting the power supply, pay attention to the polarity of the dry battery or charger to prevent the motor from reversing and thus damaging the fixed blade and the moving blade.
2. When shaving, hold the fixed blade close to your face and push it slowly. Move it against the direction of beard growth to allow the beard to smoothly enter the mesh. If it moves along the beard, it will crush the beard, which is not conducive to the beard entering the mesh.
3. Electric shavers are not suitable for shaving long beards, so it is better to shave every four days or so. If the beard is very long, you should first use a clipper or small scissors to cut it short, and then shave it off with an electric shaver. If there are no clippers or small scissors, the multi-step shaving method should be adopted. First, place the fixed blade (mesh cover) perpendicular to the beard and touch the skin to shave the beard shorter, and then proceed as per method 2.
When using an electric shaver with a clipper, the blade of the clipper should be pushed at a vertical Angle to the face to ensure a clean shave.
5. If the shaving stops during the process, the power should be turned off and then restarted. Continue shaving only after the motor rotates normally.
6. The fixed blade of an electric shaver is very thin. Do not apply excessive pressure to cause it to deform or get damaged.
7. For dry battery-powered electric shavers, the battery should be removed after use or when not in use for a long time to prevent moisture and leakage, which may cause unnecessary corrosion and damage. For AC electric shavers, after use, the power supply should be cut off and the plug pulled out to ensure safety. The rechargeable electric shaver should not be discharged too much. If the battery is insufficient, it should be charged before use. If it is not used for a long time, it should also be charged regularly (about every three months).
8. A small amount of lubricating oil should be added to the bearing parts regularly to reduce wear. Non-wet electric shavers must not be cleaned with water or volatile chemicals such as alcohol. For non-stainless steel blades, if they are not used for a long time, a thin layer of oil should be applied to the blade to prevent rust and damage to the blade.
9. After each use of the razor, use a small brush to clean off the hair and other dirt. Do not allow dirt to accumulate, otherwise the motor may get stuck or the transmission may be blocked. At the same time, once dandruff and oily skin solidify on the blade, it will affect the sharpness of the blade.