Sade Hot melt glue Gun 120W SD866 adjustable temperature high-power glue gun
【 Name 】 : SD-866 Hot Melt Glue gun
【 Brand 】 : Sade
【 Model 】 : SD-866
【 Standard 】 : Q/YD 2004
【 Registration Number 】 : zc48608861ZC
【 Power 】 : 120W
【 Specification 】 : Approximately 20cm in length x 17cm in height
【 Frequency 】 : 50-60Hz
【 Voltage 】 : 110-240V
【 Glue Stick 】 : A glue stick with a diameter of 11MM
【 Weight 】 : 0.4 kilograms per piece (including plastic film outer packaging), 10 pieces per small box; 30 pieces per large case
Sade SD866-120W Adjustable Temperature Hot Melt Glue Gun
Detachable copper nozzle hot melt gun SD866
I. Performance Characteristics
The temperature can be freely and steplessly adjusted between 100℃ and 220℃, with a high power of 120W for rapid heating.
2. The high-efficiency and energy-saving constant-temperature working mode reduces the power consumption of the hot melt glue gun by 50%.
3. Double insulation, electrical strength up to 1800V, insulation resistance greater than 100MΩ.
4. It can be used normally in an AC source with a voltage range of 110V to 240V and 50/60HZ, without being restricted by voltage fluctuations. It is equipped with an internal safety fuse for safer use.
Application of SD866 Sade hot melt glue Gun 120W adjustable temperature high-power glue gun product
Handicrafts, fabrics, ornaments, artificial flowers, models, long-haired toys, stuffed toys, PC boards, electronic components, leather goods, ceramic products, tiles, plastics, PVC, acrylic, ABS, metals, aluminum sheets, food packaging, woodworking wood, furniture, paper, cardboard, paper boxes, stone.
The usage method of SD866 Sade Hot Melt Glue Gun 120W adjustable temperature high-power glue gun
This series of products can be used for rubber strips with a diameter of 11MM
2. Insert the rubber strip from the rear of the glue gun and send it into the gun barrel. Plug in the power supply and preheat for 5 to 8 minutes. Then, pull the trigger to extrude the molten glue and control the amount of glue produced.
3. During use, if one adhesive tape is not used up at one time, there is no need to remove it. The next time you use it, you can plug it in and preheat it for 5 to 8 minutes before using it directly.
Precautions for the SD866 Sade Hot Melt Glue Gun 120W Adjustable Temperature High-power glue gun:
This product is a high-temperature glue gun. If users use glue strips that do not match the size or type, it may cause the molten glue to flow back or damage the glue gun.
2. When in operation, the nozzle of the glue gun and the melted adhesive are at a relatively high temperature. Do not touch them with your body. Do not use them in flammable and explosive environments.
3. When the glue gun is in operation, do not hold it high and keep the nozzle facing upwards. If the glue gun does not apply glue for 15 consecutive minutes, please cut off the power supply to prevent the glue strip from melting backward and causing glue to spill, which could damage the glue gun
4. When the new glue gun is used for the first time, there may be a little smoke, which is a normal phenomenon. After 30 minutes of use, the smoke will automatically disappear.
5. The tail slider of the gun should be kept clean frequently to ensure that the rubber strip can be smoothly fed into the gun barrel. It is strictly forbidden to pull the rubber gun out of the tail of the rubber gun.
When not in use, the glue gun should be placed in a well-ventilated and dry area. Do not place in damp or wet areas. Do not keep out of reach of children.
7. This tool must be placed on its stand when not in use.
SD866 Sade Hot melt glue Gun 120W adjustable temperature high-power glue gun wholesale hotline: 15958925339!
