【 Model 】 : 2103S
【 Bulb 】 : XML P50
【 Material 】 : Aluminum alloy
【 Switch 】 : Press the switch
【 Battery 】 : 1*18650 /1*26650
【 Charging Method 】 : USB charging
【 Zoom Mode 】 : Stretch the head
【 Gear Positions 】 : 5th gear, 1st gear, P50 high brightness, 2nd gear, P50 bright, 3rd gear, P50 weak brightness, 4th gear, Flash
Note: A flashlight with high power may generate heat. Brightness is directly proportional to heat generation. 
During the transportation of the goods, it is inevitable that there will be squeezing and collision. Please check the goods immediately after receiving them. If there are any problems, please contact us in time.
1. Battery inspection
After receiving the goods, please fully charge the battery before use. Insert it into the flashlight in the correct direction. Do not mix new and old batteries.
3. Switch inspection
After installing the battery, press the switch to see if it is bright
4. Poor contact check
Shake the flashlight to listen for any sounds of particles colliding or other abnormal sounds, and observe if the brightness of the flashlight changes
5. Feedback on Issues
If you find any problems, please contact us in time and we will handle the situation promptly.
| Precautions for use When charging, do not reverse the positive and negative terminals, otherwise it may cause the battery to be scrapped (the positive terminal with a "+" sign should face the head of the flashlight). |
|||||||||||||||||||||||||||||||||||||||||||||||
| 2. Note: As lithium batteries are likely to become unusable once they are completely drained, do not deplete the battery power during use. If the flashlight's brightness significantly dims during use, charge it immediately. |
|||||||||||||||||||||||||||||||||||||||||||||||
| 3. Do not frequently disassemble the lamp cap to avoid damaging the reflector or the bulb. The lamp cap part is an integrated circuit system. The bulb is soldered onto the integrated circuit board and cannot be repaired by non-professionals. The flashlight has been corrected for focusing when it leaves the factory. If it is unscrewed, please adjust the lamp cap nut by yourself to correct the focusing. Please pay attention to controlling the temperature changes of the flashlight and ensure proper heat dissipation. |
|||||||||||||||||||||||||||||||||||||||||||||||
| 4. Use "three-proof" chargers that prevent overcharging, reverse connection and short circuit. |
|||||||||||||||||||||||||||||||||||||||||||||||
| 5. Do not use batteries randomly. Use batteries of the specified model and voltage to prevent the circuit board from being burned out. |
|||||||||||||||||||||||||||||||||||||||||||||||
| If the battery is not used for a long time, it should be fully charged before storage. It is necessary to charge and discharge it once every three months or so. |
|||||||||||||||||||||||||||||||||||||||||||||||
| 7. Charging time: 3 to 5 hours (an indicator light will show when charging is complete). Never overcharge or overdischarge.
|
P50 Single flashlight (without battery charger) (Bubble wrap + white box)
