The product consists of 6 items, including 5 grinding accessories and a nail box host. Color box packaging. Made from high-quality ABS raw materials.

 

This product uses two AA batteries and operates with a high-quality motor without noise

 

2. Designed based on ergonomic principles, it features a fashionable shape and a good hand feel

 

3. Five types of grinding heads can be interchanged for use, which is convenient, safe and does not hurt hands

 

Instructions for Use

Metal grinding Head No. 1 - For sharpening the edges and corners of nails, thick dead skin, and calluses

 

Grinding head 2 ---- pointed sanding, targeting the corners of nails

 

Grinding head no. 3 ---- cylindrical grinding, targeting the heel of the nail

 

No. 4 grinding head ---- disc-shaped sanding to make the cut of nails more shiny and smooth

 

Polishing head No. 5 ---- brush the surface of the nails

 

The compact manicure tool saves you time and effort, allowing you to easily achieve your beauty. Get your slender fingers done in just ten minutes.

 

Size: Approximately 16 centimeters in length.

 

Power usage: Use 2 AA batteries.

 

 

 

• 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

• 
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

Precautions for grinding machine
(1) When using the machine, please plug in the power supply properly. It is strictly forbidden to operate the electrical appliance in violation of regulations when it is wet, not dry or in any other state with water.
(Friendly reminder: It is recommended to use a socket with a fuse switch.
(2) When sanding relatively hard wall putty, please use coarse grit sandpaper (P120/180 model is optional), and set the speed control switch to 3 or 2 positions.
(3) When sanding relatively soft wall putty, please use fine grit sandpaper (P320/400 model is optional), and set the speed control switch to 4 or 5 positions.
When grinding the exterior walls, a hard grinding disc should be replaced, and special sandpaper for exterior walls should be selected. The speed adjustment should not exceed three gears.
(5) When grinding, it is strictly forbidden to press the grinding disc against the wall with force for grinding, otherwise it may cause malfunction or damage to the rotating system
This situation is not covered by the warranty.
(6) Do not use the grinding machine for grinding without the vacuum cleaner working, otherwise the motor will be damaged.
This situation is not covered by the warranty.
(7) It is strictly prohibited to step on wires, drop motors or carry out operations in flammable and explosive places.
If the machine is damaged due to human factors such as stepping on or dropping it without following the instructions, it will not be covered by the warranty.
(8) Pay attention to checking whether the heat dissipation of each motor is good and whether the airflow is unobstructed. When assembling or disassembling, make sure the power supply is disconnected to avoid unnecessary damage.
(9) Pay attention to checking whether the work panel and the work cover are on the same horizontal plane; otherwise, it will affect the work effect.
(10) Clean the dust inside the vacuum cleaner in time. Excessive dust will affect the vacuum cleaning effect.
(11) Both the grinding machine and the vacuum cleaner operate on 220V voltage. Please check them carefully before use. Do not use it when the voltage is unstable or too high.
If the motor is damaged due to forced use without following the instructions, it will not be covered by the warranty.
(12) It is strictly prohibited to turn on the power when the sand mill is in a free state. The power can only be turned on when the sand mill is held.
(13) When the machine is not in use, it should be stored in a dry place out of reach of children

• 

• 
  
  
  
  

  Zhejiang Rongfeng Electronic Technology Co., Ltd. was established in 2007 and is located in Yiwu, China, the world capital of small Commodities. It is a professional manufacturer of nail care products integrating R&D, production and sales. The company has now established the nail care brands "Faceshowes" and "Feishixiu". The main products include nail polish glue, nail lamps, nail care instruments, nail care tools and other series. The products have passed the EU CE, German BV,MSDS and SGS certifications. With "health and safety, green environmental protection and quality guarantee" as the core, the company is committed to "serving customers and developing together". With the concept of "mutual benefit and win-win", we are jointly committed to building "Faceshowes" and "Feishixiu" into well-known nail art brands in China and around the world.

  Our company currently has a factory area of approximately 8,000 square meters, with about 150 employees on the job and a R&D and design team of nearly 20 people. The company is equipped with advanced production facilities, a complete technical quality system and a precise logistics team. At present, the company has established long-term and stable cooperation with major nail art chain stores and nail art wholesalers across the country. The products are exported to Europe, America, South America, Russia, Japan, South Korea and other countries. The products are professional and reasonably priced, and have received unanimous praise from domestic and foreign customers. The company also provides various OEM/ODM contract manufacturing services. Rongfeng Electronic Technology Co., Ltd. looks forward to sincere cooperation with you!