





USB micro DC water pump. It can be submerged or placed externally. The input voltage is between 5V. It can be powered on a plug-in power bank. It can also be plugged into a USB power port with a 5V output for use. High safety factor submersible pump, low-voltage DC voltage, no leakage, no injury to people or fish, can be used for aquarium and fish tank filtration, computer water cooling heat dissipation, outdoor fishing. Automatic flower watering, etc.
The inlet of this type of water pump can only be connected to a pipe with a maximum length of 20 centimeters. After the first connection, the entire water pump needs to be immersed in water before being taken out for water to come out of the outlet
Rated input voltage: 5V
Rated input power: 1W
Line length: 1.4 meters
Maximum flow rate: 120L/H
Maximum head: 0.4-1 meter
Weight: 0.10KG
Diameter of the water pump outletΦ 8.5 MM
Overall dimensions54.8*36.8*40.5MM
Neutral packaging box size :8*5.5*7mm. The total weight of the box is 110g.
Notes
Head issue: If the head is 1 meter, it does not mean that it can reach 1 meter when connected to the power supply. The head refers to the parallel distance of 1 meter from the water outlet to the water pipe after the water outlet is connected to the water pipe. The injection height is much lower than the head!
This water pump cannot be run without load for a long time, that is, it should not be operated in water for a long time. It is normal to make noise when running without load. Please note that it should not be operated without load.






















