Additional tax points will be added for invoicing. For detailed information, please consult our customer service. Thank you for your cooperation!
【 Lamp Bead Model 】 : XML-T6
【 Lens Material 】 : Optical convex lens
【 Work Gear 】 : 5 gears
【 Applicable Batteries 】 : 2 18650 lithium batteries
【 Lumen Brightness 】 : 1000 lumens
【 Product Dimensions 】 : 198*33*23
【 Product Material 】 : Aluminum alloy
【 Working Voltage 】 : 3.7V
【 Light Source Color Temperature 】 : 6000K
【 Product Color 】 : Black
【 Product Lamp Cup 】 : None
【 Can it be recharged directly 】 : No
【 Whether to focus 】 : Zoom focusing
【 Product Features 】
1. Imported CREE T6 lamp beads from the United States, with a maximum brightness of 1000 lumens and a service life of 100,000 hours;
2. Convex lens: Eagle-eye convex lens, with good light transmission performance, not easy to be damaged, and a sturdy aluminum attack head to protect the lens from wear and tear.
3. Telescopic zoom: The head can be zooming by stretching left and right. It features astigmatic-focusing mode, making it convenient to use in various situations.
4. Rear switch: Made of high-quality natural rubber, with anti-slip surface treatment, and a touch switch for switching lighting modes.
5. Battery contacts: The copper-plated cylindrical battery contact design ensures that copper has excellent electrical conductivity, effectively preventing poor contact.
During the transportation of the goods, it is inevitable that there will be squeezing and collision. Please check the goods immediately after receiving them. If there are any problems, please contact us in time.
1. Battery inspection
After receiving the goods, please fully charge the battery before use. Insert it into the flashlight in the correct direction. Do not mix new and old batteries.
3. Switch inspection
After installing the battery, press the switch to see if it is bright
4. Poor contact check
Shake the flashlight to listen for any sounds of particles colliding or other abnormal sounds, and observe if the brightness of the flashlight changes
5. Feedback on Issues
If you find any problems, please contact us in time and we will handle the situation promptly.
| Precautions for use When charging, do not reverse the positive and negative terminals, otherwise it may cause the battery to be scrapped (the positive terminal with a "+" sign should face the head of the flashlight). |
|||||||||||||||||||||||||||||||||||||||||||||||
| 2. Note: As lithium batteries are likely to become unusable once they are completely drained, do not deplete the battery power during use. If the flashlight's brightness significantly dims during use, charge it immediately. |
|||||||||||||||||||||||||||||||||||||||||||||||
| 3. Do not frequently disassemble the lamp cap to avoid damaging the reflector or the bulb. The lamp cap part is an integrated circuit system. The bulb is soldered onto the integrated circuit board and cannot be repaired by non-professionals. The flashlight has been corrected for focusing when it leaves the factory. If it is unscrewed, please adjust the lamp cap nut by yourself to correct the focusing. Please pay attention to controlling the temperature changes of the flashlight and ensure proper heat dissipation. |
|||||||||||||||||||||||||||||||||||||||||||||||
| 4. Use "three-proof" chargers that prevent overcharging, reverse connection and short circuit. |
|||||||||||||||||||||||||||||||||||||||||||||||
| 5. Do not use batteries randomly. Use batteries of the specified model and voltage to prevent the circuit board from being burned out. |
|||||||||||||||||||||||||||||||||||||||||||||||
| If the battery is not used for a long time, it should be fully charged before storage. It is necessary to charge and discharge it once every three months or so. |
|||||||||||||||||||||||||||||||||||||||||||||||
| 7. Charging time: 3 to 5 hours (an indicator light will show when charging is complete). Never overcharge or overdischarge.
|
