Common problems of water-coagulated soft film：

1.No film was found for use，What should I do?？

a：The film is of a three-layer structure，Due to the strong adhesion of the film，They are generally attached to1On the transparent film，The film used is very thin，It is also transparent，pro、Just scratch it with your fingernail and you'll see。

2.It wasn't stuck properly once，进灰了What should I do?？

a：Wash your hands thoroughly before applying the film，If dust gets in，Dust can be stuck away with dust-removing stickers，Then repaste。

3.The film was scraped too hard，What should I do if there is a groove left?？

a：After the film is pasted，Don't scratch bubbles with your nails，The operation of pushing bubbles with a card wrapped in a cleaning cloth can significantly reduce the occurrence of depressions，And the membrane has a slight，If the trace is not deep, the bubbles can gradually and automatically recover，It does not affect our normal use。

4.贴膜没贴好有气泡What should I do?？

a：The unique fine breathable function of our membrane，After pasting24"Hour，The bubbles or water mist will disappear automatically，You don't need to worry about this。