





Small triangle (with 2-meter umbrella)
Folding specification: 46*9*9 cm
Opening specification: 65*65*65 cm (at maximum)
Socket size: It can be inserted into umbrella poles with a diameter of less than 2.5CM.
Weight: approximately 0.85KG
Large triangle (with 2.4-meter umbrella)
The opening size is 3.5*55*45 CM
The size is 3.5*55*11cm
The inner diameter of the pipe is 3.5cm. (Measure whether the diameter of your umbrella pole is within this range.)
The large umbrella base is dual-purpose. It can be used with 2.5cm to 3.5cm umbrella tubes
Large four corners (with 2.4-meter and 3-meter umbrellas)
【 Opening Dimensions 】 : Width 85cm, pipe height 30cm
【 Folding Size 】 : Approximately 40X13X10cm
【 Weight 】 : Approximately 1.3 kilograms
Usage: 2-meter, 2.4-meter, 2.8-meter, 3-meter and 3.2-meter umbrellas can all be used
Length: 55cm, width: 11cm, weight: 1.5 kilograms
Note: Umbrella holes with diameters of approximately 3.2cm and 3.2CM-2.5CM can all be locked
Umbrella handles larger than the product diameter cannot be inserted! Those with too small diameters can be added
Insert everything tightly
Usage instructions: As the umbrella base is relatively light, it is recommended to press it down with something when in use
Umbrella stand, to prevent it from being blown over by strong winds. The umbrella base is low and has a large area. It won't fall over without wind.
When using the umbrella base, pull it up first to release the plug from the groove. When folding up, when the umbrella seat is on
First, pull it outwards to release the plug from the groove and then close it


























