Function Introduction
■ Display hours and minutes, and can achieve 12/24-hour system conversion.

■ Display "Month", "day", (from 2000 to 2099)

■ Snooze and three alarm modes (1-7,1-6,1-5)

■ Thermometer function, which can switch to display temperature in ℃(Fahrenheit) or ℉ (Celsius).

■ Thermometer temperature range: -10℃ to +50℃ (14℉ to 122℉).

■ Automatic half-brightness function: The brightness will automatically dim from 18:00 to 6:00, and the automatic half-brightness range can be set.

■ 2-level display brightness adjustment: bright and dark

■ Time memory function (powered by 3 AAA batteries).
■ Provide a 5V charging USB output port

■ Power supply: 3 AAA batteries (not included)
1 USB input cable (included)

Key function description
Under normal time conditions, press the MODE key to switch to the corresponding function mode: clock mode → Date mode → Temperature mode → Night ON/OFF

2. Except for the temperature mode, press the ALARM button alone to turn on/off the alarm function.

3. For normal time, date and temperature modes, press the UP key to adjust the display brightness by two levels.

Install AAA batteries or plug in a USB cable to connect to an external power source. The full display lasts approximately 2 seconds. After a "BI" sound, it enters the normal time display mode, with the default 24-hour system at 0:00. The screen remains constantly lit when connected to a USB external power source. It is powered by AAA battery and will automatically turn off after 15 seconds without any key operation. Pressing any key will light up the screen.

Time setting
1. In normal time MODE, hold DOWN the MODE key for about 2 seconds to enter the time setting mode. Press the MODE key to switch and display the following setting sequence, and complete the setting by using the UP/DOWN keys in combination. Holding down will rapidly increase/decrease.
12/24-hour conversion → Hour → minute → Exit

2. When switching to the 12-hour system, the PM symbol will light up in the afternoon.

Date setting
Press the MODE key to enter the date mode. By default, January 1, 2018 will be displayed
2. In date MODE, hold DOWN the MODE key for about 2 seconds to enter the date Settings. Press the MODE key to switch and display the following setting sequence, and use the UP/DOWN keys in combination to complete the Settings. Holding down will rapidly increase/decrease.
Year → Month → day → Exit

Alarm clock setting
Except for the temperature mode, press the ALARM button alone to turn on/off the alarm function. When the alarm is turned on, the AL symbol lights up.
2. Press and hold the ALARM key for about 3 seconds in any mode to enter the setting state. Press the ALARM key to switch and display the following setting sequence, and complete the setting by using the UP/DOWN keys in combination. Holding down will rapidly increase/decrease.
Hour → Minute → Snooze time → Select Workday alarm (1-7/1-6/1-5) → Exit

The default snooze interval is 5 minutes, and the setting range is from 1 to 60 minutes.
4.1 to 7 is for daily alarm, 1 to 6 is for alarm from Monday to Saturday, and 1 to 5 is for alarm from Monday to Friday.

Sleepiness function
When any alarm reaches a certain point, it will automatically return to that alarm mode and emit a "beep beep beep" alarm sound, which gradually increases from slow to fast. At the same time, the alarm symbol will flash. At this point, pressing any key will stop the alarm, or no key operation will make it ring for 1 minute and then stop. However, the alarm symbol will not disappear.
2. When the alarm goes off, press the SNOOZE key to pause the alarm, activate the snooze button once, and the snooze indicator will flash. Pressing other keys will stop the noise and prevent you from falling asleep.
3. During the snooze interval, press other keys to turn off the snooze. Pressing the "Snooze" key does not affect sleepiness.

Night mode

1. In normal time, date and temperature modes, simply press the UP key to directly adjust two brightness levels. The default brightness level is on.
2. In time MODE, press the MODE key three times to enter the night setting mode (showing OFF), and press UP or DOWN to turn on/off the night mode (the night mode is turned off by default).
After enabling the night (display ON) mode, it will automatically enter the semi-bright state from 18:00 to 6:00 by default.
4. When the night MODE is ON, press and hold the MODE key for about 2 seconds to enter the night mode interval time setting. The setting sequence is: when the night time starts → when the night time starts → when the night time ends → when the night time ends.

Temperature display
Upon power-on, it automatically detects the current ambient temperature. The normal measurement range is -10℃ to 50℃(14 ℃). F~122? F).
When the temperature is below -10℃, it shows -10℃; when it is above 50℃, it shows 50℃.
3. In temperature mode, simply press the DOWN key to convert between Celsius and Fahrenheit temperatures.
4. In the temperature MODE, hold down the MODE key for a long time until there is a "BI" sound. Then, the LED will alternately display the time, date and temperature. The time will be displayed for 10 seconds, and the date and temperature will each be displayed for 3 seconds. Press and hold the MODE key again until a "BI" sound is heard and the normal time is displayed.

It provides a 5V charging USB output port
When this product is plugged in with an external DC5V power supply, the USB output port will provide DC5V to power electronic products such as mobile phones and ipads. However, when there is only an AAA battery, the USB output port will not have DC5V.

Precautions
If the LED display of this machine is blurry and the sound is faint, please replace the battery in time.
2. If any abnormality or malfunction occurs in this machine, please cut off the power and then power it back on.
3. Please do not place this product in a damp place
4. Please do not scrub the surface of this product with corrosive liquids

  1. Large-sized screen display with high-brightness LED beads.

2. Memory function: No need to reset after power failure.

3. Switch between Celsius and Fahrenheit, 24 hours and 12 hours.

4.25 World-renowned music chord ringtone selections.

5. The brightness of the lights in three modes automatically switches.

Six. Three different alarm sets can be set within a day.

7. Alarms can be set for five, six or seven days a week.

8. The alarm sound is too loud.

9. Calendar, day of the week, and temperature display.

10. Mirror surface design.

11.USB output current can be used to charge mobile phones, computers, etc

   12. The standard configuration does not include a power adapter. It is recommended to use a 5V 1A adapter. This alarm clock needs to be plugged in all the time for use.

 

13. The appearance is simple and fashionable. The fluorescent board serves as the visual center of the product, and the printed advertising effect of the product is excellent.

Main promoted industries: government, state-owned enterprises, communication energy, telecommunications, banks, schools, pharmacies, hotels, securities, insurance, IT, tobacco, alcohol, food. 

 

 

 

    Product material: ABS environmentally friendly plastic

Product color: White, black, two colors available. Customization of other colors is supported. Quantity: over 100 pieces.

Product dimensions: L22cmxD10.5cmxH4.5cm

Product single weight: 450G(including packaging) 300G(excluding packaging)

Product packaging: Cowhide box (with built-in inflatable cotton bag for safe packaging)

Ø 25.5*14.5*7.3CM

Outer box specifications: L58.8xW36.5xH41.8cm

Packing specification: 30PCS per box /13.5kg

Ø Logo printing: Customized silk-screen printing or laser engraving can be made according to customer requirements