The company mainly engages in the production and processing of various shower heads and hoses, providing various customized services for foreign trade companies, foreign merchants, and cross-border e-commerce. Domestic buyers who need water efficiency labels, please make a note on the order and we will deliver the goods as required. For those who need labels but forget to make notes, we can also send pictures of water efficiency labels for buyers to print

The default packaging provided is a regular plastic bag. If you have higher requirements for the packaging, please purchase the packaging link below

Showerhead seat

The quality requirements for sanitary ware include several aspects such as allowable dimensional deviations, appearance quality, deformation, physical properties, and flushing functions. The appearance quality requirements for the observation surfaces of washbasins, sinks, urinals and water tanks are divided into three types: clean surfaces, visible surfaces and installation surfaces. The washable surface refers to the visible surface that can be rinsed with water after the product is installed and used. "Visible" refers to the surface of a product that is easily visible to people from a regular position after installation. The installation surface refers to the concealed surface that comes into contact with the wall (floor) surface or other parts after the product is installed. No fine cracks are allowed on the clean surfaces of all kinds of sanitary wares and the visible surfaces of water tanks. Cracks that do not affect use are allowed on the visible surfaces of washbasins, sinks and urinals. All surfaces of various sanitary wares are allowed to have subtle and non-usable defects such as orange glaze (i.e., the glaze surface is like orange peel with poor luster) and smoke (referring to the partial or complete appearance of gray, brown, black and other abnormal colors on the surface). A small number of pinholes, pores, spots and pits that do not affect usage are allowed to exist on all surfaces of various sanitary wares. The clean surfaces of the washbasin and sink, as well as all surfaces of the toilet and water tank, must not be bumped. A small amount of glaze deficiency and foreign substances adhering to the glaze surface that do not affect usage are allowed on all surfaces of various sanitary wares (except for the washed surface of washbasins). When users are choosing facial washers, sinks, urinals and water tanks, they can comprehensively judge their quality based on the appearance quality requirements introduced above. In addition, users should also carefully observe the color differences between each product or a set of products. Generally, there should be no obvious color differences.

Physical performance requirements: All kinds of sanitary ware are designed to hold water or be frequently rinsed with water. They should have a very low water absorption rate to avoid swelling. All kinds of sanitary ware should also have a certain ability to resist cracking. The flushing function is the ability of a toilet to discharge the dirt inside and clean the toilet bowl at a specified water volume. When the outer diameter of the sewage outlet of a general siphonic or flush toilet is less than 100mm, the water consumption should not exceed gL. When the outer diameter of the sewage outlet is greater than 100mm, the water consumption shall not exceed 13L.

 




The quality requirements for sanitary ware include several aspects such as allowable dimensional deviations, appearance quality, deformation, physical properties, and flushing functions. The appearance quality requirements for the observation surfaces of washbasins, sinks, urinals and water tanks are divided into three types: clean surfaces, visible surfaces and installation surfaces. The washable surface refers to the visible surface that can be rinsed with water after the product is installed and used. "Visible" refers to the surface of a product that is easily visible to people from a regular position after installation. The installation surface refers to the concealed surface that comes into contact with the wall (floor) surface or other parts after the product is installed. No fine cracks are allowed on the clean surfaces of all kinds of sanitary wares and the visible surfaces of water tanks. Cracks that do not affect use are allowed on the visible surfaces of washbasins, sinks and urinals. All surfaces of various sanitary wares are allowed to have subtle and non-usable defects such as orange glaze (i.e., the glaze surface is like orange peel with poor luster) and smoke (referring to the partial or complete appearance of gray, brown, black and other abnormal colors on the surface). A small number of pinholes, pores, spots and pits that do not affect usage are allowed to exist on all surfaces of various sanitary wares. The clean surfaces of the washbasin and sink, as well as all surfaces of the toilet and water tank, must not be bumped. A small amount of glaze deficiency and foreign substances adhering to the glaze surface that do not affect usage are allowed on all surfaces of various sanitary wares (except for the washed surface of washbasins). When users are choosing facial washers, sinks, urinals and water tanks, they can comprehensively judge their quality based on the appearance quality requirements introduced above. In addition, users should also carefully observe the color differences between each product or a set of products. Generally, there should be no obvious color differences.