Instructions for Use

Do not puncture the atomization plate at the spray port!!

Before the first use, please take out the cotton swab (be careful not to lose the spring at the bottom), soak it in water for 1-2 minutes to allow the cotton swab to fully absorb water, and then reinstall it for use.

3. Only tap water or mineral water can be used. Purified water is not allowed (as it will affect the fogging effect).

Usage method and function

1. Connect the power supply, gently press the button to activate the continuous spray mode. Press the button again to activate the intermittent spray mode (spray for 4 seconds and stop for 6 seconds). Press it for the third time to turn off the device.

2. With the device on, press and hold the button for two seconds without releasing it to turn off the night light (the seven-color light), and then press and hold it again to turn it on.

3. All spray modes are set to automatically cut off power after 3.5 hours and can be restarted for continued use.

4. For the first use, fill it with water (about 90%), let it stand for 3 to 5 minutes, and then turn it on.

"Product Real Shot