Underground metal detectorMD-3010II
MD-3010IILiquid crystal display type underground metal detector from2000It has been launched in foreign markets since the year，It is highly praised by foreign merchants，And quickly entered the European and American markets，Thus being sold far to the United States，Canada，Britain，Germany，France，Italy，Finland，Turki，South Korea，More than ten countries including Russia。
Functional features and applications：
MD-3010II金属探测器是一种数字式智能型探测器采用先进日本原loading富士32CPU中央处理器为核心electricity路来处理转换数字信号。It has strong discriminative power，It has significant features such as high accuracy，It is more intuitive。
MD-3010IIMetal detectors are mainly used to detect underground metal objects，It is widely used not only in military applications but also in security checks，Archaeology，Prospecting，Treasure Hunt，Search for metal foreign objects on the lawn, etc，MD-3010IIIt is also particularly suitable for searching for metallic foreign objects in deserts、Gold and silver jewelry and various coins.
Trial use
In order to familiarize oneself with the detector's responses to various metals，Before the first use，You can try it out both indoors and outdoors
Indoor use
*Turn on the detector，At this point, the detector should be in normal working condition。
*Place the detector on the table，Remove the metal items worn on your body，Such as：Watch、Ring、Jewelry, etc.。
*Adjust the detection disk，Face the ceiling with the detection surface。
*Place the detection object on the detection disk2-3In inches，Slowly sweep across the detection disk.
户外Trial use
*Turn on the detector，At this point, the detector should be in normal working condition。
*Find a piece of ground outdoors without any metal objects。
*Bury the detection target underground，Goals should be maintained among each other1-2A distance of feet。
*Keep the distance between the detection disk and the ground constant1to2Between inches，Move the detector slowly at the location where the detection target is buried。
*当目标被探测to时，The detector will make a sound and the image on the LCD screen will start to flicker。
*Slowly lift the detection plate，The depth icon on the LCD screen rises.
*When detecting targets，若矩形光圈从一个目标图案跳to另一个或反过来，此探测to的目标可能不在显示屏上或探测区
It is a high mineral content area，Reducing the sensitivity and re-detecting can prevent the latter situation from occurring。
Error signal
This product has high sensitivity，可探测to埋藏很深的物体，Therefore，Useless signals and other obstacles may cause signal confusion，Solution：Only dig for targets whose signals flicker repeatedly，You can scan the detection disk front to back on the ground，Please be careful to distinguish between occasional flashing signals and those that flash repeatedly and continuously。
To reduce error signals，It can be divided into small areas for slow short-distance overlapping scanning。
Use the detection disk
*Move the detection disk at an appropriate speed，Such as walking too fast，Overlapping scans will not be possible，And thus some areas were overlooked。Meanwhile，The sensitivity will decrease.，It will leave behind metal objects that are buried relatively deep。
*Keep the detection disk as close to the ground as possible，Keep parallel to the ground，So as to expand the breadth and depth of the search。If operating on the lawn，It can be gently brought close to the lawn。
Product parameter data：
1．electricity pool: 6section5号electricitypool（By default, the battery will not be dispatched，要electricitypool可以联系客服）
2．electricity flow:Minimum～30mA"Maximum～60mA
3．工作electricity压: 7.1～9.6v
4．Signal frequency: 7.5KHz+/-1KHz
5．Working environment: -20℃～60℃
6．Overall dimensions: (mm)550(long)×355(wide)×153(high)
7．单台包loading:53.5*19*13CM 1.5kg
8．loading box：每box6the
9.The outer box size of one box：56×42×41CM 10KG
