"MADE IN KOREA
Ice Crystal Special Glue Remover Gel, eyelash extension glue Remover, transparent, light fragrance, non-irritating (Original genuine product), free of any colored additives, 15G
When the humidity is above 70%, the glue hardens faster, but it is not an ideal hardening effect. Both its durability and strength will deteriorate. In addition, excessive humidity is prone to condensation, which can breed mold and mites. From a hygiene perspective, it is also necessary to avoid excessively high humidity. On the contrary, if the humidity is too low, the moisture required for the glue to harden will be insufficient, which will result in a slow hardening speed.
Key points for glue inspection to avoid problems:
When there is a significant difference in temperature and humidity between summer and winter, special attention should be paid to maintaining the room temperature.
② Glue needs to be managed by a dedicated person and stored in a special way. It can be kept in a refrigerator or a greenhouse at a temperature of 0 to 2 degrees Celsius.
③ Mark "Purchase date, opening date, and name of the manager" on the glue
④ Aging of the glue may cause problems such as easy shedding of eyelashes and a slower hardening speed. When used frequently, it is best to replace the new glue every 30 days or so.
Note: Eyelash extension glue aging means that the quality and performance of the glue are not as good as before opening.
The ideal indoor temperature for eyelash extension
The ideal state is when the indoor temperature is maintained between 25 and 28 degrees Celsius.
Please stick the artificial wool or other attachments with glue at room temperature.
Usage: Use a cotton swab or directly apply or drop the de-gumming gel onto the glue area of the graft. Then, have the client lie down with their eyes closed and rest for 5 to 10 minutes. Do not allow the client to open their eyes during this period. After 5 to 10 minutes, wipe back and forth with a cotton swab. The eyelashes will fall off easily. Finally, wipe clean with a cotton pad. If possible, use facial cleanser to clean your face. This way, it will be neat and tidy.
The following is our product production license
SECTION 1– CHEMICAL PRODUCT AND COMPANY IDENTIFICATION |
MSDS Name :Gel Remover
Company Identification :Lanson
H3-26050, International Trade Market, Yiwu City, Zhejiang Province, China
SECTION 2– COMPOSITION, INFORMATION ON INGREDIENTS |
Component |
CAS NO. |
%by Weight(approximate) |
4-Methyl-dioxolan- 2- one |
108-32-7 |
20 |
2-Oxolanone |
96-48-0 |
50 |
Brij-78 |
9005-00-9 |
5 |
Brij-52 |
9004-95-9 |
5 |
Polyethyleneglycol |
25322-68-3 |
10 |
Vinyl Polymer |
9003-01-04 |
1 |
Sodium Stearate |
822-16-2 |
6 |
Methyl Parabene |
99-76-3 |
0.3 |
Propyl Parabene |
94-13-3 |
0.3 |
Collagen |
9064-67-9 |
1 |
Fragrance |
N/A |
0.4 |
Pigment |
** |
1 |
SECTION 3– HAZARDS IDENTIFICATION |
EMERGENCY OVERVIEW
Appearance : colorless liquid
Potential Heath Effects
Eye : May cause eye irritation.
Skin : May cause skin irritation.
Ingestion : May cause digestive tract disturbances. The toxicological properties of this substance have not been fully investigated.
May be harmful if swallowed.
Inhalation : May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic : No information found.
SECTION 4– FIRST AID MEASURES |
Eyes : Flush eyes with plenty of water.
Skin : Flush skin with plenty of soap and water.
Ingestion : If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation : Get medical aid immediately. Remove from exposure to fresh air immediately. if not breathing, give artificial respiration. if breathing is difficult, give oxygen.
Notes to Physician : Treat symptomatically and supportively.
Antidote : None reported.
SECTION 5– FIRE FIGHTING MEASURES |
General Information : As in any fire, wear a self-contained breathing apparatus in pressure demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media : In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam.
Flash Point : 135 deg C
Auto ignition Temperature: 455 deg C (851.00 deg F)
Explosion Limits, Lower:3.60 vol %
Upper: 16.00 vol %
NFPA Rating : (estimated) Health : 1; Flammability : 1; Instability : 0
SECTION 6– ACCIDENTAL RELEASE MEASURES |
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks : Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.
SECTION 7– HANDLING AND STORAGE |
Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage: Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep containers tightly closed. Store protected from moisture.
SECTION 8– EXPOSURE CONTROLS, PERSONAL PROTECTION |
EngineeringControls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use process enclosure, local exhaust ventilation, or other engineeringcontrol airborne levels.
Exposure Limits :
ACGIH : none listed
NIOSH : none listed
OSHA : none listed
Personal Protective Equipment
Eyes: Wear appropriate Protective eyeglasses or chemical safety goggles as described by OSHA’s eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
SECTION 9– PHYSICAL AND CHEMICAL PROPERTIES |
Physical State: Liquid
Appearance: Colorless
Odor: Mild Caramel odor
pH: Not available.
Vapor Pressure: 1.5hPa @ 20C
Vapor Density: 3.0
Evaporation Rate: Not available.
Viscosity: Not available.
Boiling Point :90 deg C
Freezing/Melting Point: -45 deg C
Decomposition Temperature: Not available.
Solubility: Miscible.
Specific Gravity/Density: 1.1200g/cm ³
Molecular Formula: C4H602
Molecular Weight: 86.09
SECTION 10– STABILITY AND REACTIVITY |
Chemical Stability : Stable under normal temperatures and pressures.
Conditions to Avoid : Incompatible materials, strong oxidarits.
Incompatibilities with Other Materials : Strong oxidizing agents - strong acids - strong bases - strong reducing agents.
Hazardous Decomposition Products : Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization : Has not been reported.
Purchase Notice
Before placing an order for the item, please contact me first to confirm if it is in stock to avoid any delay caused by out-of-stock situations. However, it is usually available. If there are any in-stock products within 5 p.m. after the buyer makes the payment, they will be dispatched on the same day if the order is placed before 5 p.m. [If the order is placed after 4:30 p.m., it will be dispatched the next day.] However, there may be other reasons. If the shipment is delayed, we will notify the buyer as soon as possible
2. Our store always ships goods upon receipt of payment and does not accept payment after delivery!
3. Regarding the products: We all took the photos in our own photography studio, but due to the different color differences of the monitors! Pictures of the actual object.
4. Please complete the transaction within 5 days after placing the order.
5. After receiving the goods, if you are satisfied with this transaction, please don't forget to give us a positive review to support you. If you are not satisfied or have any opinions or suggestions, please let us know so that we can make improvements!
Product maintenance
When taking it out of the box, gently pull it out along the direction of the eyelashes with your fingers. When removing the false eyelashes from the eyelid, hold the middle of the false eyelashes and pull them down. Do not pull down two or three hairs.
2. The used false eyelashes should have their adhesive removed and be neatly stored in the box. Be careful not to stick eyeshadow powder, mascara or the like onto the false eyelashes, otherwise they will get dirty or damaged.
3. When cleaning false eyelashes, use eye makeup remover water to clean them.
Use a cotton pad to press and rub the false eyelashes, starting from the base and then moving on to the front part. The movements should be gentle; otherwise, it cannot be used.
Notes
Don't apply mascara to false eyelashes
Many methods of wearing false eyelashes claim that applying a layer of mascara after wearing false eyelashes can prevent the real and false eyelashes from separating. However, it is difficult to clean false eyelashes. As long as the natural eyelash curler is curled and shaped before wearing false eyelashes, the real and false eyelashes can fit together and are less likely to separate
When using false eyelashes, handle them gently
Don't pull the false eyelashes too hard. Try to keep the curvature of the base of the false eyelashes. After use, comb the eyelashes smooth with an eyelash comb.
Don't wash false eyelashes with water
Dirty false eyelashes can be gently brushed with a brush, and solidified glue can be gently pulled off by hand.
