





The online prices are for reference only. For specific details, please consult our customer service
The above prices are for the charging version. If you need the non-charging version, please refer to the detail page
Please contact the customer service for an inquiry. The non-rechargeable version is 0.5 yuan cheaper
Bulk purchasing customers can privately chat about prices
There are also plastic gift boxes of 2 pieces each. If you need them, please contact customer service
Model: 3712
Charging model dimensions: 30cm (length) *2cm (head diameter) *3.9cm (tail diameter)
Dimensions of the non-charging model: 27cm (length) *2cm (head diameter) *3.9cm (tail diameter)
Net weight of the rechargeable model: 120g
Net weight of the non-rechargeable model: 115g
White box packaging size: 14*6*4.5CM
Bulb: CREE XPE 3W
Battery: 3*AAA /1*18650
ChargingDirect charging
Waterproof: IP44
Material: Aluminum alloy
Acrylic lens
Switch: Push-type switch
Gear: 3 gears for strong light - weak light - flash (The same function for non-charging models - 3 gears for variable light)
Zoom mode: Telescopic zoom
Note: The tail is equipped with a strong magnet (the magnet can withstand 100 degrees of high temperature and prevent detachment).
Rechargeable version










Real photos of the non-charging model



one Instructions on Switch Usage
1. The battery should have the positive terminal facing inward (towards the lamp head) and the negative terminal facing outward (at the tail).
2. The switch is at the rear. The switch function is the switch function. Pressing the switch lightly is the dimming function.
two Circuit Board Usage Instructions
The flashlights in our store adopt advanced voltage stabilization and constant current technology, which can effectively meet the requirements of LED flashlights for voltage stabilization and constant current.
2. Special Note: a. Do not use under overvoltage. The voltage should not exceed 4.2V. b. Keep the battery upright facing forward. Do not place it in reverse, otherwise the battery will burn out. c. Pay attention to controlling the temperature changes of the flashlight to ensure heat dissipation. d. Non-professionals are not allowed to open the circuit board.
3. Warranty Description: Open or processed circuit boards are no longer covered by the warranty.
Three Lithium Battery Usage Instructions
1. Characteristics of lithium batteries: The charging methods of lithium batteries are different from those of mobile phone batteries. Lithium batteries have no memory effect and can be charged at any time. Do not overcharge or overdischarge them.
2. The first charge should last at least 6 hours. After that, it's fine as long as the green light on the charger is on. There's no need to overcharge.
3. Special reminder: Use a charger with "three-proof" features that prevent overcharging, reverse connection, and short circuit.
4. If the battery is not used for a long time, it should be fully charged and stored. It is normal to charge and discharge it once every three months or so.
Four Instructions for using the flashlight
When using a flashlight, select it based on the voltage and battery requirements of the flashlight. Do not use it randomly to prevent the circuit board from being burned out. Do not use batteries of different models and voltages simultaneously.
2. During use, when the brightness of the flashlight changes significantly, turn it off to prevent over-discharging the battery.
3. Heat dissipation tips: During the use of the flashlight, ensure proper heat dissipation. It is strongly recommended that when the battery is fully charged, the second gear be used first. This can extend the lifespan of the flashlight's lamp head and battery. Do not shine the flashlight directly into people's eyes. It is extremely bright and dazzling, which may affect eyesight, especially for children.
Five Fault repair
1. Check the battery: Make sure the battery is charged and installed in the correct direction. Do not use batteries of different brands, and do not mix new and old batteries.
2. Check the tail cover: Ensure that the switch is tightened and in good contact, guarantee that the copper column of the tail cover is in good contact with the metal sheet of the tail cover pressure ring, and pay attention to whether the lamp head is loose.






Company Introduction
Ninghai Xidian Chenye Electrical Appliance Factory is a high-tech company specializing in the research and development, production and sales of outdoor lighting flashlights. It has its own brand and its products cover various types of LED high-intensity flashlights, high-power flashlights, rechargeable flashlights, bicycle lights, diving flashlights, explosion-proof flashlights, etc. Our sales network covers over 100 countries and regions around the world, including Europe, America, China, the Middle East, etc., and is highly favored by outdoor sports enthusiasts, factory and mine enterprises, special workers and household consumers.
Improve quality. Honesty and trustworthiness, mutual benefit and common development are our tenets. Our company sincerely thanks all the users who have supported and loved us over the years. We hope to continue to receive your support and will, as always, provide you with high-quality products and services.
Our philosophy: Integrity, cooperation, innovation and development
Our goal:



































































