





【 Name 】 : Rabbit Water Dispenser
【 Material 】 : Plastic bottle body + faucet
【 Specification 】 : Small size 180ml capacity, weight 60 grams
Large size: 350ml capacity, weighing 68 grams
【 Color 】 : Transparent natural color
【 Picture and Description 】 :
Usage tips: Make sure it is filled with water. If it is not filled, the internal pressure will be insufficient and leakage will occur. Install the faucet properly and tighten it. Some water bottles have a stopper shape, so they must be pushed tightly without any leakage. Turn the water bottle upside down, block the water outlet with your fingers, and shake it up and down several times to expel the air at the front end of the water outlet. Bubbles can be seen emerging from the tail of the water outlet. The bottle body can also be squeezed to squeeze out a small amount of drinking water, creating a vacuum inside the bottle to balance the pressure inside and outside the bottle.
It is a normal phenomenon that the installed water bottle will naturally drip water in the first few minutes. When the pressure inside and outside the bottle reaches the equilibrium point, it will stop naturally.
Features
- The pet water jug is anti-biting and anti-gnawing.
- Double snap-on design for more secure fixation!
- The ball design allows pets to push the steel ball up when they stick out their tongues to lick, exposing the water. Water won't come out when the ball is not licked. It won't wet the pet's fur.
- The inner rubber ring of the lid is designed to prevent leakage.
- The transparent plastic bottle body allows the water level in the bottle to be seen at a glance.
Note: Plastic products must not be filled with boiling water or hot water.
Special reminder: The water dispenser does not leak. Please refer to the usage method
When using it for the first time, fill the bottle with water and tighten the cap. Otherwise, if air leaks in, it is very likely to leak.
Hands are warm. Please do not hold the bottle with your hands to avoid water dripping due to inconsistent internal and external pressure.
After filling it with water, gently touch the ball a few times with your finger. This is done to make the pressure inside and outside the water dispenser consistent. Then, after watching the water dispenser stop moving and not discharging water, clamp it onto the cage.
Note: If used for particularly small hamster cages, this water dispenser is rather long and not suitable. For small hamster cages, it is recommended to purchase an 80ML one. Please consider the details at your own discretion.
The springs and hooks used for fixation must be hung in the corresponding positions. For instance, the springs must be placed in the grooves on the body of the water dispenser bottle. If not placed in the groove, it may tighten the bottle body, causing uneven pressure and water to seep out.
Please choose the appropriate water dispenser according to your cage.









【 Material 】 : Plastic bottle body + stainless steel faucet
【 Specification 】 : Small size 180ml capacity, weight 60 grams
Large size: 350ml capacity, weighing 68 grams
【 Color 】 : Transparent natural color
【 Picture and Description 】 :
Usage tips: Make sure it is filled with water. If it is not filled, the internal pressure will be insufficient and leakage will occur. Install the faucet properly and tighten it. Some water bottles have a stopper shape, so they must be pushed tightly without any leakage. Turn the water bottle upside down, block the water outlet with your fingers, and shake it up and down several times to expel the air at the front end of the water outlet. Bubbles can be seen emerging from the tail of the water outlet. The bottle body can also be squeezed to squeeze out a small amount of drinking water, creating a vacuum inside the bottle to balance the pressure inside and outside the bottle.
It is a normal phenomenon that the installed water bottle will naturally drip water in the first few minutes. When the pressure inside and outside the bottle reaches the equilibrium point, it will stop naturally.
Features
- The stainless steel spout prevents biting.
- Double snap-on design for more secure fixation!
- The ball design allows pets to push the steel ball up when they stick out their tongues to lick, exposing the water. Water won't come out when the ball is not licked. It won't wet the pet's fur.
- The inner rubber ring of the lid is designed to prevent leakage.
- The transparent plastic bottle body allows the water level in the bottle to be seen at a glance.
Note: Plastic products must not be filled with boiling water or hot water.
Special reminder: The water dispenser does not leak. Please refer to the usage method
When using it for the first time, fill the bottle with water and tighten the cap. Otherwise, if air leaks in, it is very likely to leak.
Hands are warm. Please do not hold the bottle with your hands to avoid water dripping due to inconsistent internal and external pressure.
After filling the water, gently touch the ball a few times with your finger. This is to make the pressure inside and outside the water dispenser exactly the same. Then, after watching the water dispenser stop moving and not discharging water, clamp it onto the cage.
Note: If used for particularly small hamster cages, this water dispenser is rather long and not suitable. For small hamster cages, it is recommended to purchase an 80ML one. Please consider the details at your own discretion.
The springs and hooks used for fixation must be hung in the corresponding positions. For instance, the springs must be placed in the grooves on the body of the water dispenser bottle. If not placed in the groove, it may tighten the bottle body, causing uneven pressure and water to seep out.
Please choose the appropriate water dispenser according to your cage.

















